Dimensions Height x Width x Depth (basic version without options)
|
554 x 530 x 500 mm / 21.81 x 20.87 x 19.68 in |
Note: |
Change the installation height of the cabinet (and consequently the cut-off and control devices) in accordance with the applicable electrical standards. |
Weight Control unit (standard version)
The weight indicated may differ depending on the configuration. Always refer to the plate posted on the Control Unit
|
100 kg / 220 lb without packaging
|
Power supply voltage
(according to EN 60204-1 § 4.3.3 standard, voltage interruption not exceeding 20 ms) |
from 400 Vac -10% to 480 Vac +10%
|
Frequency (according to EN 60204-1 § 4.3.3 standard) |
50 a 60 Hz (±2 Hz) |
Main switch interruption power |
Standard Models 6 kA a 500 Vac North America Models 8 kA a 500 Vac
|
Note: |
On C5 Compact the sectioning device is a pure isolating switch |
Power installed |
from 4 to 6 kVA |
Auxiliary circuits power
|
24 Vdc |
Environment conditions Cabinet protection (rear compartment excluded) (according to EN 60529 standard) |
IP 54 / NEMA 12 |
Rear compartment protection (according to EN 60529 standard) |
IP 2x |
Environment temperature without cooling systems (Test conditions according to EN 60068-2-14 standard) |
from +5 °C to +45 °C *2 / from +41 °F a 113 °F |
Environment temperature with cooling systems (Test conditions according to EN 60068-2-14 standard) |
from +5 °C to +55 °C *2 / from +41 °F a 131 °F |
Environment storage temperature (according to EN 60204-1 § 4.5 standard) |
from -25 °C a +55 °C <br /> from -13 °F a 131 °F <br />+70 °C / 158 °F for periods shorter one hour |
Maximum temperature gradient |
from -25 °C a +55 °C / from -13 °F a 131 °F - +70 °C / 158 °F for periods shorter one hour. |
Relative humidity
(according to EN 60204-1 § 4.4.4, test conditions HD 323.2.3. S2) |
1,5 °C/minute / 2,7 °F/minute from 5% to 95% without condensation
|
Altitude of the installation site (according to EN 60204-1 § 4.4.5 standard) |
from 0 a 1.000 m / 0 to 3280 ft above mean sea level |
Axis controlling capability |
up to 8 axes (6 basic axes, 1 additional module from 11 A, or 1 additional module double up to 5.5 A) / 6 axes |
Cooling Standard cabin model |
Natural convention |
Drive command |
Forced air recirculation |
Vibrations and crashes Sine vibration (according to EN 60068-2-64 standard)
|
Frequency 10 - 250 Hz 0.6 g rms axis Z acceleration 0.2 g rms axes X-Y acceleration |